A Detailed Overview of Assessment Validation and Validating Assessments
A Detailed Overview of Assessment Validation and Validating Assessments
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.
This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.
A Look at the Two Types of Assessment Validation
The Basics of Assessment Validation
As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
The Process of Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
Ideal Times to Conduct Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated
- when new training products are added on scope
- your course gets reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Training Products to Validate
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Getting Started with Assessment Tool Validation: Resources Needed
Educational Materials
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Validation Panel
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
As a group, your validation panel must possess:
Vocational competencies and industry skills pertinent to the unit being validated
Recent knowledge and skills in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its future version
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles read more of assessment.
Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Basic Principles of Assessment
Fairness – Does the assessment process provide equal opportunity and access to everyone?
Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?
Essential Rules of Evidence
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Follow Through with Actions
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappying
prepare bottles, feed babies from bottles, and clean equipment
prepare solid foods and feed babies
respond suitably to infant signs and cues
prepare and settle babies for rest
monitor and foster age-appropriate physical exploration and gross motor skills
Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
Complete or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What can be included in a work package?
Answers might include:
Required materials
Relevant expenses
Time assigned for activities
Appointed roles and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Possible answers could include, but are not limited to:
Weather conditions – isolation of the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering
People – isolating, engineering, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administrative controls
Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.